Similar Products:
EFP to fiber converter
2 channels 3G/HD SDI to fiber multiplexer
4 channles 3G/HD-SDI to fiber multiplexer
8 channles 1U rack 3G-SDI to fiber multiplexer
16 channles 1U Rack 3G-SDI to fiber multiplexer
1/2/4/8 channles 3G/HD-SDI with Ethernet,Data to fiber converter
1/2/4/8 channles 3G/HD-SDI with Audio,Data,Ethernet to fiber converter
1/2/4/8/16 channles 3G-SDI with Banlanced/Analog Audio to fiber converter
RCA audio to fiber converter
1-ch To 8 channles BI-DI Banlanced audio to fiber Opitc
Specification:
Mulitfunctional SDI fiber opitc converter including 2 channels 3G-SDI( It supports transmission image of SDTV (143-540Mbps), HDTV (1.485Gbps) and HDTV (3Gbps, 1080p60).1 port 10/100 Ethernet and 1-ch RS232/422/485(half Duplex or Full-duplex).
Opitcal:
| Wavelength | 1310nm&1470nm~1610nm |
| Output Power | -9~-3dBm / -3~+2dBm |
| Optic fiber | 50/125u multimode,62.5/125u multimode,9/125u single mode |
| Rx sensitivity | -18dBm |
| Optical connector | LC/PC (optional) |
| Distance | 0~500M (MM) / 0~80KM (SM) |
Video:
| SDI Input |
| Signal Type SDI | SMPTE 424M, SMPTE 292M, SMPTE 259M |
| Data Rates | 270Mbit/s - 1.48Gbit/s - 3Gbit/s |
| Cable Equalization | Automatic cable EQ (Belden 1694A cable) 250m @ 270Mbit/s, 140m @ 1.5Gbit/s, 80m @ 3Gbit/s |
| Connector | BNC 75 Ohm |
| Number of tranmitter channel | 1 |
| Number of tranmitter Loopout | 1 |
| Number of receiver output | 2 |
| General: |
| Input Power | 5 V DC or12 V DC |
| Power consumption (maximum) | Transmitter: 1.8W Receiver: 1.5W |
| Operating temperature | 0°C to 55°C |
| Storage temperature | -10°C to 70°C |
| Operating humidity | 0 ~ 95% (non-condensing) |
Data:
| Data protocol | reverse or half duplex RS485 |
| Data rate | 0~500 Kbps |
| Error rate | < 10-9 |
| Connector | Standard terminal lead |
Ethernet:
| Work mode | Full duplex/half duplex |
| Data Rate | 10/100Mbps(AUTO) |
| connection terminal | RJ45 |
|
|
2 channels 3G/HD-SDI with 1 port 10/100 Ethernet ,1-ch RS232/422/485 to fiber multiplexer Images
|
